Surgex XR315 Home Theater Surge Eliminator with Remote (15 Amps, 8 Outlets)

Authorized Dealer
Our Price $1,199.00 CAD

Availability
In Stock

  • Eliminates surge energy up to 6,000 Volts
  • Advanced Series Mode® and EMI/RFI filtering
  • COUVS® Catastrophic Over/Under Voltage Shutdown and ICE® Inrush Current
  • Elimination technologies (XR-315)
  • Improves audio and video performance
  • 100% non-sacrificial components
  • Coax protection (XR-115)
  • A-1-1 certified

Featuring patented Advanced Series Mode surge elimination and power conditioning technologies, our residential solutions are engineered to properly protect digital equipment from AC surges and electrical transients that can disrupt sound quality and digital performance.

Unlike common protection solutions, SurgeX technology is non-sacrificial and eliminates surge energy up to 6,000 volts, without producing harmful side effects such as ground contamination or common-mode disturbances that can degrade the performance of AV systems.

General
Load Rating15 amps @ 120 volts
Power Requirement (no load)15 watts
Surge Let-Through Voltage (6000-volt surge)0 volts
UL 1449 Adjunct Classification Test Results1000 surges, 6000 volts, 3000 amps, B3 pulse.
Measured suppressed voltage170 volts, no failures
Federal GuidelinesGrade A, Class 1, Mode 1 (CID A-A-55818)
EMI/RFI Filter, Normal Mode (50-ohm load)40 dB @ 100 kHz; 50 dB @ 300 kHz;
50 dB @ 3 MHz; 50 dB @ 30 MHz
EMI/RFI Filter, Common Mode (50-ohm load)18 dB @ 300 kHz; 30 dB @ 1 MHz;
50 dB @ 5 MHz; 50 dB @ 20 MHz
Maximum Applied Surge Voltage6000 volts*
Maximum Applied Surge CurrentUnlimited, due to current limiting*
Maximum Applied Surge EnergyUnlimited, due to current limiting*
Endurance (C62.41-1991 Category B3 pulses)1 kV>500,000; 3 kV>10,000; 6 kV>1000
Undervoltage Shutdown90 volts (resume at 100 v)
Overvoltage Shutdown145 volts (resume at 135 v)
Maximum Load Inrush Current During Power-up1000 Joules
Remote Turn-on Applied Voltage Range5 to 30 volts DC
Contact Closure1.5 mA
5 V DC Applied Voltage0.1 mA
12 V DC Applied Voltage1.5 mA
24 V DC Applied Voltage5.0 mA
Auxiliary Relay Contact Rating30 Volts at 1 Amp
LED Output12 volts DC, maximum 20 mA (resistor required)
Dimensions1.75" H x 19" W x 10.5" D
(4.5 x 48.3 x 26.7 cm)
Weight11 lbs (5 kg)
Temperature Range5º to 35º C
Humidity Range5% to 95% R.H., non-condensing
Agency ListingsETL and cETL certified to (UL 1449; CSA C22.2 No.8-M1986, R2000)
Downloads
Brochure/Data SheetDownload
ManualDownload
WarrantyDownload

Write a review