- Complete recording studio in a box
- Live-end, dead-end (LEDE) room design
- High performance fabric covered acoustic panels
- Includes easy-mount hardware and screws
The perfect project studio kit for recording hobbyists and professionals alike! The London 10 kit is designed for rooms that are approximately 100 sq. ft., but it also compliments larger rooms when combined with other Primacoustic Bass Traps, Clouds, and Diffusers. The London 10 ships complete with eight 12”x48”x2” Control Columns to control primary reï¬‚ ections, and twelve 12”x12”x1” Scatter Blocks to reduce ï¬‚ utter echo. Each kit includes Surface Impalers, screws, and wall anchors for easy installation. 20 panels. Choice of black, grey, or beige fabric
The Broadway London 10 room kit is designed for rooms up to 120 sq ft (11.1 sq m), or can be combined with other products to treat larger spaces. Whether you are building a recording studio, home theatre, or Boardroom, these easy-to-use kits are a perfect place to start.
The London 10 contains select Broadway panels that tackle problems affecting any room, such as primary reflections, flutter echo, and standing waves. In addition to acoustic panels, each London 10 room kit includes the corresponding mounting hardware and instructions for easy installation.
Broadway panels are made from high-density 6lb per cubic foot fiberglass, offering nearly five times greater absorption than typical low cost foam alternatives. This means that you get more absorption with less panels, while assuring an even absorption curve throughout the frequency range. The London 10 room kit is available in three fabric colors. 20 panels included.
|Manufacture Part Number||Z900-0100-00|
|SURFACE COVERAGE||44 sq/ft (4.1 sq/m)|
|PANEL SIZES & QUANTITY||Eight - 12â€ (305mm) x 48â€ (1219mm) x 2â€ (50mm) (beveled edge)|
Twelve - 12â€ (305mm) x 12â€ (305mm) x 1â€ (25mm) (square edge)
|MOUNTING IMPALERS||Twenty Eight - Surface impaler clips|
|RECYCLED CONTENT||Up to 40%|