Monitor Audio Anthra W12 Subwoofer - White
Monitor Audio Anthra W12 Subwoofer - White
Monitor Audio Anthra W12 Subwoofer - Black
Anthra W12
The W12 is the mid-sized model within the Anthra subwoofer series. It features a 12” (30 cm) Rigid Surface Technology II (RST II) C-CAM high-excursion driver powered by a Class-D 1,000 Watt amplifier, housed within a comprehensively internally braced, sealed-box cabinet.
Engineered to deliver impressive bass in medium and large spaces, the Anthra W12 subwoofer features a formidable 1,000 Watt Class-D amplifier driving a 12” (30 cm) Rigid Surface Technology II (RST II) C-CAM high-excursion driver. The W12 can be used on its own or linked with up to three other Anthra subwoofers for a truly immersive, ultra-dynamic listening experience.
A full-colour LCD display and rotatory dial is located on the back panel, to allow for basic subwoofer setup and EQ preset selection, while advanced features including DSP configuration and multi-sub connectivity setup are available via the MaestroUnite app.
Key Features
- 1 x 12” (30cm) Rigid Surface Technology II (RST II) and ceramic-coated aluminium magnesium (C-CAM) high-excursion driver for super-clean performance
- 1 x 1000 Watt Class-D amplifier ensures that the driver is working to its optimum performance level, no matter what the volume
- Massive motor assembles and longer round-wound voice coils, which are dual layered and made of copper-coated aluminium wire (CCAW) for precise control at extreme low frequencies
- 2 inch full-colour LCD display screen with rotary dial for menu selection and basic setup
- RCA inputs (left/right. The left Input is LFE)
- RCA outputs allows daisy chain of up to 4 Anthra subwoofers
- XLR inputs for professional installation connectivity option
- XLR outputs allows daisy chain of up to four Anthra subwoofers
- Available in Gloss Black and Satin White finishes
Specifications | |
---|---|
System Format | Active - Sealed Cabinet |
Lower Frequency Limit | -6dB @16Hz |
DSP | 28 Bit 50 MIPS, Configuratable through MaestroUnite |
Amplifier Output Power, 120Vac | Instantaneous: 1325 W, Continuous short-term: 700 W |
Low Pass Filter | 20-200Hz LPF with Roll off Adjustable from -3 to -48dB/Oct |
Inputs | Stereo Unbalanced RCA (or mono/LFE using only connector marked LFE)Mono/LFE Balanced XLR |
Outputs | Stereo unbalanced outputs with unbuffered throughput from RCA Inputs Mono/LFE Balanced XLR outputs with unbuffered throughput from XLR Inpu |
Drive Unit Complement | 1x 12" (305 mm) High Linear-Excusion Triple Suspension Driver |
Upper Frequency Limit | (LPF Off) -6dB @400Hz |
Analogue Digital Conversion | Autoranging Input which combines a 10Vrms maximum input with low signal to noise for small signals |
LED UI Control | Brightness, On-Off |
Custom EQ | Configurable through MaestroUnite;3 pre-defined EQ curves plus 3 custom EQ curves each with 8 band custom EQ supporting (Peaking, High Shelf, Low Shelf, High Pass) |
Power Consumption | 200 W |
Amplifier Classification | High-Efficiency Class-D |
Driver Excursion (pk-pk) | 50 mm |
Amplifier Output Power, 240Vac | Instantaneous: 1700 W* Continuous short-term: 900 W** |
Phase Control | 0-360 Degrees measured at LPF Crossover |
Volume Level | Wide adjustable input gain to allow maximum output from a wide range of input signals |
Mains Input Voltage | Universal Mains, 85-265VAC |
Cabinet Construction | Braced 25 mm thick MDF with 36mm front baffle |
External Dimensions (without feet) (HxWxD) | 374 x 374 x 374 mm |
Grille | Cloth covered magnetically attached Grilles |
Weight | 32.4 kg |