LUXUL XAP-1030 Commercial Grade Omni 802.11n Wireless Access Point

Authorized Dealer

We now offer financing powered by

 The XAP-1030 is designed for placement central to the desired coverage area. It implements Luxul’s exclusive and patented technology to deliver 4 times the coverage of traditional Wi-Fi equipment. Because it only requires a single Ethernet cable for both power and data, it is simple to install and is a great choice for delivering single access point whole home or small office Wi-Fi coverage.


  • Provide a Centrally Located High Performance Wi-Fi Network
  • Deliver “Whole Home” or Office 802.11n Wi-Fi Coverage
  • Increase Mobile Client Device Network Sensitivity and Performance
  • Simplify Installation While Minimizing Setup Time and Expense
  • Eliminate Client Device Roaming Issues


  • Patented Signal Technology
  • Highest FCC Approved Performance (Effective EIRP 36dBm)
  • 18dB of Receive Gain Increases Client Device Network Sensitivity
  • 2.4 GHz IEEE 802.11n Compliant
  • QoS Functionality
  • Enhanced Multi-Level Security
  • Up to 8 SSIDs and Support for VLAN Tagging
  • Single Cable Installation with POE
Standards „ IEEE 802.11n, „ IEEE 802.11b/g, „ IEEE 802.3af
Hardware LAN Port: 1 RJ45 10/100 Mbps data and power input, „ 5dBi Omnidirectional Dipole Antenna, „ System LEDs: Power, WLAN active, LAN link/activity, Bridge mode active.
RF Information „ Frequency Band: 2.401 – 2.473GHz, „ Operating Channels: 11
Available Transmit Power2.401 – 2.473GHz (IEEE802.11g/n): Up to 36dBm EIRP 30dBm @ 6~9Mbps / MCS0, 29dBm @ 12~18Mbps / MCS1-2, 27dBm @ 24~36Mbps / MCS3-4, 26dBm @ 48~54Mbps / MCS5-7 , 2.401 – 2.473GHz (IEEE802.11b): Up to 36dBm EIRP 30dBm @ 1~11Mbps
Available Receive Gain2.401 – 2.473GHz (IEEE802.11g/n): Up to 18dBm, „ 2.401 – 2.473GHz (IEEE802.11b): Up to 18dBm
Receive Sensitivity (Typical)2.401 – 2.473GHz (IEEE802.11n): Up to -91dBm „ 2.401 – 2.473GHz (IEEE802.11g): Up to -92dBm „ 2.401 – 2.473GHz (IEEE802.11b): Up to -93dBm
Wireless Operation ModesAccess Point „ Point-to Point Wireless Bridge „ Point-to-Multipoint Wireless Bridge
Management and SecurityRemote Web-based Management „ WEP (128 bit) „ WPA-PSK (TKIP, AES, TKIP&AES) „ WPA2-PSK (AES) „ WPA-PSK/WPA2-PSK Auto (TKIP&AES) „ Web Based Firmware Upgrade „ QoS: Wireless Multi-Media (WMM) Extensions
Certifications „ FCC Part 15, Class B
Power Requirements„ Ethernet POE in: 48VDC/0.375A for IEEE 802.3af Compliance „ Power Consumption: 5W Nominal, 13W Max
Temperature RangeOperating: -4°F to 140°F (-20°C to 60°C) „ Storage: -40°F to 158°F (-40°C to 70°C)
Operating Humidity5% to 95% (Non-condensing)
Mechanical„ Access Point Dimensions WxHxD: 7”(177.8mm) x 4”(101.6mm) x 1.25”(31.75mm)

Write a review