Arcam A29 Integrated Amplifier

Authorized Dealer

We now offer financing powered by

Product Review by - Read Review

  • Integrated stereo amplifier
  • 80W Class G amplification
  • On board PSU for rSeries products
  • CR902 system remote control
  • Phono input configurable for line/MM
  • Large ergonomically designed aluminium knob
  • Low power 0.5W standby

We set out to incorporate everything we have learnt in almost 40 years to deliver an amplifier that will set new standards and provide class leading sound quality for the best possible reproduction of your music.

Drawing on the many years of amplifier design experience at Arcam, the A29 uses the best quality components and engineering practice to produce a product that will give many years of musical pleasure and reliable service.

With a class G amplifier, toroidal based power supply, acoustically damped chassis, complementary transistor output stages and exceptionally low levels of distortion and noise the A29 is capable of reproducing music with all its original authority and detail. Rest assured you will be hearing the music just as the artist intended.

The A29 have been designed to leapfrog the competition with a massive 80 watts per channel into 8 ohms and 175 watts into 4 ohms, allowing for huge extra power reserves from our latest generation class G topology that is both clever and efficient. During normal operation, distortion is measured in less than one part per million so that this massive power is deliver with total control and finesse.

There have been great strides made in improving audio sources and loudspeakers in recent years and the time is right to match them in the field of amplifier design. This ground breaking amplifier is a must audition amplifiers for music lovers who understand that power is nothing without control.

Continuous power output (20Hz—20kHz at 0.5% THD), per channel
oth channels, 8?, 20Hz—20kHz80W
Single channel, 4?, at 1kHz175W
Harmonic distortion, 80% power, 8? at 1kHz0.003%
Inputs : Phono (MM) cartridge
Input sensitivity at 1kHz5mV
Input impedance47k? + 100pF
Frequency response (ref. RIAA curve)20Hz - 20kHz ± 1dB
Signal/Noise ratio (Awtd) 50W, ref. 5mV input80dB
Overload margin, ref. 5mV at 1kHz23dB
Nominal sensitivity1V
Input impedance10k?
Maximum input4.6Vrms
Frequency response20Hz - 20kHz ± 0.2dB
Signal/noise ratio (Awtd) 50W, ref. 1V input105dB
Preamplifier output
Nominal output level735mV
Output impedance230?
Headphone output
Maximum output level into 600?5V
Output impedance1?
Load range16? - 2k?
Accessory power output
2.1mm DC connector6V, 500mA
Mains voltage110-120V or 220-240V
Power consumption (maximum)500W
Dimensions W x D x H (including feet)433 x 275 x 85mm
Weight (net)9.2kg
Supplied accessoriesMains lead
CR902 remote control
2 x AAA batteries
Accessory power cable
Product FlyerDownload
User ManualDownload

Write a review