Anthem Integrated 225 amplifier
Authorized Dealer
Anthem Integrated 225 amplifier
Integrated 225
We now offer financing powered by 
Love music? Still want to spin those vinyl LPs to hear all the great music you’ve collected? If you listen to music regularly and don’t require the extra channels of a home theater receiver, put the Integrated 225 on your list of “must haves”. It’s an all-in-one Anthem quality two-channel analog solution that offers the performance of high-powered separates, without the associated cost and complexity. The Integrated 225 is an amplifier/preamplifier boasting a high-quality built-in phono stage to accommodate Moving Magnet phono cartridges.
As usual our “keep-it-simple” philosophy lies front and center. The Integrated 225 is sleek, its outlook minimalist. It doesn’t call attention to itself in any overt way yet when it sits in the A/V rack, you can’t help noticing just how good it looks. The inside story is similar: high-quality component parts; critical inputs are buffered to prevent crosstalk; a combination active/passive “EQ” technology in the phono stage unlocks all of the magic hidden in those vinyl grooves … with a transparency, refinement and detail that should be far more expensive, but isn’t.
| PHONO PREAMPLIFIER | |
|---|---|
| Input Impedance | 47 k |
| Input Capacitance | 100 pF |
| Maximum Input | 18 mV at 20 Hz, 140 mV at 1 kHz, 160mV at 20 kHz |
| Gain (At 1 KHz) | 35 dB |
| Crosstalk (At 1 KHz) | 80 dB |
| RIAA Response | +/- 0.5 dB (100 Hz to 20 kHz); -1 dB (20 Hz) |
| THD+N (at 1 kHz, 5 mV input) | 0.05% |
| S/N Ratio (ref. 5 mV at 1 kHz, IEC-A filter) | 83 dB |
| PREAMPLIFIER | |
| Input Impedance | 30 k |
| Pre-Out Output Impedance | 560 |
| Rec-Out Output Impedance | 100 |
| Rated Input | 1.0 Vrms |
| Maximum Input | 7.6 Vrms |
| Minimum Load | 5 k |
| Rated Output (100 k1 load) | 1.0 Vrms |
| Maximum Output (100 k1 load) | 7.6 Vrms |
| Headphone Output | 500 mW into 32 at 0.03% THD+N |
| Channel Separation (at 1 kHz) | 75 dB |
| Crosstalk Between Inputs (At 1 KHz) | 72 dB |
| XLR Pin Configuration | Pin 1: Ground; Pin 2: Positive; Pin 3: Negative |
| Frequency Response And Bandwidth | 20 Hz to 20 kHz (+0, -0.1 dB); 1 Hz to 170 kHz (+0, -3 dB) |
| THD+N (at rated input and output, 80 kHz BW) | 0.003% |
| IMD (CCIF at 15 kHz and 16 kHz) | 0.0005% |
| S/N Ratio (A-weighted, ref 2.0 Vrms) | 105 dB |
| POWER AMPLIFIER | |
| Frequency Response | 20 Hz to 20 kHz (+0, -0.15 dB) |
| Bandwidth | 1 Hz to 200 kHz (+0, -3 dB) |
| THD+N | 0.01% at 1 kHz, 0.03% at 20 kHz (100 W into 8 1) |
| Power Bandwidth | < 10 Hz to 100 kHz (+0, -3 dB, 200 W into 8 1) |
| Slew Rate | 25 V/µs |
| Headroom | 1.4 dB (8 1), 2.8 dB (4 1) |
| Damping Factor | 80 at 1 kHz (ref. 8 1) |
| S/N Ratio (A-weighted, ref 225 W) | 105 dB |
| Crosstalk | > 57 dB (100 Hz to 10 kHz) |
| Voltage Gain | 29 dB |
| Infra Red | |
| Carrier Frequency | 38 kHz |
| Max. Emitter Current | Pass-through of input |
| Trigger | |
| Input Polarity | Non-polarized |
| Output | Pass-through of input |
